Desk Bed Plan Ideas
Computer desk bed created according to a loft bunk bed provides a cozy work space for your child. This is defined space for homework can help your child concentrate during study time while saving almost 30 square meters of floor space. This entire project should take about 3-4 hours. These directions are for a double size mattress, but you can change them to larger beds by changing the timber dimensions
Make desk bed, use a drill bit with the same diameter as your 8- inch bolt. Drill two holes at each end of 75-inch beams. Drill 3 inches from the end, in a line 3/4 inches apart. Sand any surface of your timber. It does not have to be polished but should be smooth enough to avoid splinters. Drill two holes at one end of each of the 66-inch positions using the same drill you did in step one. Drill the holes in the middle 12 inches and 12 3/4 inches from the end.
Make desk bed, sand all surfaces of your timber. Sand the plywood slices twice. Put the two 75-inch beams and the two 36-inch beams in a rectangle with the 36-inch beams inside the 75-inch beams. All beams should rest on their narrow sides. Finish the rectangle with two wooden screws at each collection. Screw in through the side of the long beam and into the end of the shorter beam.